Corrugated Roof Panel Roll Forming Machine

We manufacture and export

Corrugated Roof Panel Roll Forming Machines

. These

Corrugated Roof Panel Roll Forming Machines

are designed to use optimum man power and stable steel base design. These

roll forming machines

are used in industrial sectors.

Corrugated Roof Panel Roll Forming Machines

are equipped with various features including en31 material shafts, elecon gear box, ABB motors and more. These

Corrugated Roof Panel Roll Forming Machines

has no limit on processing length; you can set a program on the computer control according to your requirements.

Features of
Corrugated Roof Panel Roll Forming Machines
:

D coiler 5 ton cap.
Entry Gate with
Roll Forming
Line with 18 stations
10 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)

Technical Specifications of
Corrugated Roof Panel Roll Forming Machines
:

Maximum sheet width that can be formed : 1250 mm
Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
Horizontal distance between shafts : 500mm
Number of forming stations : 16 nos.
Total HP for Line : 8
Speed of the machine : 10 -14 mt / mint
Size of machine : 9500 x 1700 x 1100 mm

Mandrel Uncoiler

Coil weight : 5 MT Max
Coil width : 1250 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted

Entry Gate:
Entry gate will be provided for movement of sheet to

roll former

.

Main Base:
The main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station):
The stands are mounted on the bed of the

roll forming machine

the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each

roll forming

head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbores are fixed in position whereas the top arbores along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Roll shafts:
The roll shafts dia. 70mm will be manufactured from quality steel and will be keyed to locate tooling.

Drive:
The drive to the

roll former

will be by means of a chain. The main drive will be provided by means of 10 HP motor

Tooling:
One set of Tooling with EN grade will be from imported material suitable for your

Corrugated Roof Panel Roll Forming Machines

as standard supply. The same is involved in operations like rough machining, key way, rough profiling, profile machining and inspection with final template for above.

Cutting Unit (Hydro):
Hydraulically operated power pack along with cutting die with 3 HP electrical.

Roll Forming Machines

Office:
19, Harikunj Society,
Opp. Water Tank,
Varachha Main Road,

SURAT

395 005 – GUJ INDIA

Factory:
Block No. 64, Plot No. 4,
NH No. 8, Kamrej Kadodara Road
Vill. Kosmadi Patiya, Valthan
Tal. : Kamrej,
Dist

SURAT

- 394 326 GUJ INDIA.